Browser-based firmware install

Flash your T-Deck or T-Deck Plus from the web

To access the web flasher, you must have a base licence, make a purchase from the store or Patreon.

Shop
Install flow

Install the firmware from the browser.

Use Chrome or Edge, pick the correct port, and flash the selected build directly from this page.

Flasher access: Standard
You are using the standard public firmware. Login and whitelist access will switch this page to your account-specific build automatically.
This requires Google Chrome or Microsoft Edge on a desktop computer. Firefox and Safari are not supported.
To flash
  1. Connect your device over USB.
  2. Click the install button below.
  3. Select the correct COM port when prompted.
  4. Wait for flashing to complete.
  5. Reboot the device and continue to the Licence Portal.
V2.0.0-v19-firmware-merged
This will erase your flash. Proceed with caution. If you only want to update your firmware, use the update file. If its the first time flashing to your device - then use this.
Your browser does not support WebSerial. Please use Chrome or Edge.

Selected build
Base/V2.0.0-v19-firmware-merged at New Install with erase warning.

Release Notes
General bug fixes
Try Before You Buy

Demo firmware — verify your hardware.

This experience is provided to confirm your SD card and device work correctly before purchasing. Please note this demo may not reflect the most recent MeshUltra firmware offerings.

Purchase flow

Need access to a build?

Make a purchase in the shop, then return here once the firmware is attached to your account.

Flash Card

Standard

Current file
Base/V2.0.0-v19-firmware-merged